Видео

Andy the mechanic tnx a lot for your all effort to teach us

Brilliant video thanks I've just bought this kit 😀

I HAD THE TENSION SPRING GO ON A FORD LOOSE SOME OF ITS TENSION AND THE COG BELT WOULD RIDE UP ON ONE OF THE PULLEYS AND IT WOULD CUT THE BELT IN HALF...I COULD THEN GET HOME IF I USED THE 1/2 BELT ... FINALLY I FIGURED IT OUT... ED IN USA

😊😊😊😊😊

Wheres the gorgeous girls gone

Thanks for info!

👍🏼👍🏼👍🏼👍🏼👍🏼

Hello Andy at what time you will start live session

My very first mig welder was a three phase murex 180, the best welder I ever owned, got that in 81. I purchased a Migatronic in the early 90's as I needed to be able to weld at 300 amps continuous on a job I had at the time and for some reason gave the murex to my brother in law who ran it for several more years then threw it into a skip when one of the diodes blew out. I told him the diodes were replaceable but by that time the skip had been collected from his works, I still have the manual and circuit diagram from that Murex some where in my collection. There should be continuity between the two outer pins on the pot. but it wont show on the continuity setting on the meter as it will be the ten K of that particular pot. Prise the black cap off the red knob and there is a nut that clamps the knob to the shaft, the shaft is not supposed to come away like it did. I always blow the dust out of my welders once a year, do the computers as well.

Great, I thought I was going senile and had forgotten it was so awkward. This has restored my faith in my ability.

Any 😂snap on tools have a lifetime warranty for the small yellow screwdriver 🪛 thank you for sharing your wonderful tools

Treasure!

behind every damaged screwdriver . is a story of a man that having a bad day lol

Isn't the body panel tool called a 'joggler'? Sad to see that stubby screwdriver so idly dismissed. I have three, one with flats on the handle so you can fit a spanner on. Known as Mr. Stubby he's helped me out no end of times.😁

same pair of snips i have

Re-watching your renovation videos also helps when people message you about certain details, years after you've put them up.

What is the wall thickness of the square tubing for the axle?

Awesome job . Thank you .

Hi Andy, couldnt catch the stream yesterday listened today. How's the Ranger going, did it do a DPF burn off. Interested to know as I have a Ranger too. Kev

Mine has been acting up super bad and it reads 6.0kohms and it’s supposed be at 4.4 according to manual does that mean I have to change it?

Great video. I like that its not rushed.

Can you sharpen a 2mm bit ? Takes a good eye. Been doing it for 20 years.

Can you give me any advice on where I can get the mounting bolts for the brake calipers

if anything the big sockets will do for pressing bearings in

Looks like my socket box of misc tools 😂

Hello mister Andy I would like you to return a workshop for maitenance duty we can lurne so much

Men at work.

Andy you can get your gedore socket replaced it comes with a lifetime warranty

Where did you get the f6a service manual from thats the one i need

Sure is going to take some time to sort out all those tools, but it is like Christmas time with all the nice surprises waiting in the amo boxes. You can never have too many tools. Cheers Andy.

Thanks - much prefer this style of video.

Andy, what happened to the Myford lathe you started to do up. did you give up on it!

Never throw away any tools, worn out impact sockets can be used to press out bearings etc for example.

Andy, you're the boss... the first of your videos I ever watched taught me how to fully service my mazda demio. Cheers, bud. I've been subscribed ever since.

Great video. Here, the light never goes out. Have 12v on red and the wiring is to simple to wrong. Any tip? Tkss

What year is that bike? I was told that these later oil in frame models share engine and primary oil. (Which is why I use the same oil in each on my 78 T140.) You can see the three small holes in the case just above the primary chain adjuster and below the stud that holds on the alternator...they're to the right of the sprockets if you pause at 1:18:29 From what I understand, those 3 holes let engine oil into the primary. I'm not sure how it keeps the level it needs.

Yes de Melgar tol

Nice one Andy great spot , cheers , shaneo, Nelson, 🍺👍

Tx mate. Had to replace my favourite extension cord plug. Now I deserve a beer! Cheers.

Awesome video Andy😊

try black bear pass you WILL need 4 wheel drive and balls of steel

Circuit boards could be repaired instead of buying

Awesome my friend

even the sand blaster is smiling

Xenas hot

That 4 wheel fire car was a Tyrrell as in Ken’s designs It was sunny and warm today at the races

a good idea to file grub screw marks burs and damages on shaft. before driving the shaft threw the bearings.

Happy fathers day andy

👍👍👍👍

I welded my mower handle two months later it broke again an inch above the weld